ABB 615 Series - Page 973

Name Type Default Description
AU_OPEN BOOLEAN 0=False
Executes the command for open direction
1)2)
AU_CLOSE BOOLEAN 0=False
Executes the command for close direction
1)2)
ITL_BYPASS BOOLEAN 0=False Discards ENA_OPEN and ENA_CLOSE interlocking
when TRUE
1) Not available for monitoring
2) Always direct operation
Table 866: 52 Output signals
Name Type Description
SELECTED BOOLEAN Object selected
EXE_OP BOOLEAN Executes the command for open direction
EXE_CL BOOLEAN Executes the command for close direction
OP_REQ BOOLEAN Open request
CL_REQ BOOLEAN Close request
OPENPOS BOOLEAN Signal for open position of apparatus from I/O
CLOSEPOS BOOLEAN Signal for close position of apparatus from I/O
OKPOS BOOLEAN Apparatus position is ok
OPEN_ENAD BOOLEAN Opening is enabled based on the input status
CLOSE_ENAD BOOLEAN Closing is enabled based on the input status
Table 867: 29DS Output signals
Name
Type Description
SELECTED BOOLEAN Object selected
EXE_OP BOOLEAN Executes the command for open direction
EXE_CL BOOLEAN Executes the command for close direction
OPENPOS BOOLEAN Apparatus open position
CLOSEPOS BOOLEAN Apparatus closed position
OKPOS BOOLEAN Apparatus position is ok
OPEN_ENAD BOOLEAN Opening is enabled based on the input status
CLOSE_ENAD BOOLEAN Closing is enabled based on the input status
1MAC059074-MB A Section 9
Control functions
615 series ANSI 967
Technical Manual