418
Spring Reverb
Use this tab to apply and adjust the settings for the built-in Spring Reverb effect.
Parameter Description Value Range
Pre-Delay Len
th of time between dry si
nal and reverberated si
nal. 0–250 ms
Time Len
th of reverb tail. 1.0 – 10.0 s
Mix Wet/dry amount of the reverb effect. 0–100%
Diffusion Rate of increasing density of reverb reflections.
At lower settings, the sound of individual reflections is more present.
t hi
her settin
s, reflections are more uniform.
0–100%
Width Stereo width of reverb si
nal. Hi
her values
ive wider stereo separation. 0–100%
Low Cut Center frequency for reverb si
nal low-cut filter. 20.0 Hz – 1.00 kHz
To Next Page
Loading...
