Akai MPC Live User Manual

471
AIR Hype (continued)
Effects 2
Use this tab to adjust the settings for the Delay, Reverb,
Compressor, Pumper and Limiter effects.
Parameter Description Value Range
Delay Time Amount of time between the dry signal and the
delayed signal.
1/16 – 16/4
Feedback
A
mount of si
g
nal fed back into the delay line. 0–100%
Freq Adjusts the filter cutoff frequency of the delayed
si
g
nal.
100 – 16000 Hz
Mix Wet/dry amount of the delay effect. 0–100%
L/R
Reduces the delay Time in either the Left or
Right stereo field. This is useful for creating
offset, panned delays.
L 50:100 – R 100:50
Reverb Pre-Delay Length of time between dry signal and
reverberated si
g
nal.
0.0 – 250.0 ms
Time Len
g
th of reverb tail. 0.3 – 60.0 s
Mix Wet/dry amount of the reverb effect. 0–100%
Compressor Threshold Signal level after which the compressor will be
applied.
-30.0 – 0.0 – +10.0 dB
Ratio Amount of compression applied. 1.0:1 – 20.0:1
A
ttack Len
g
th of time to apply the comp
r
ession. 0–100%
Output Amount of additional output gain for the
compressed si
g
nal.
-20.0 – 0.0 – +20.0 dB
Pumper Rate Speed of the pumper effect. Bar, 1/2 – 1/32T
Depth
A
mount of si
g
nal attenuation by the effect. 0–100%
Release Amount of time to release the effect. 0–100%
Limiter Drive Amount of drive added after the limiter effect. 0.0 – 30.0 dB

Akai MPC Live Specifications

General

Built-in display	Yes
Mixer section	-
Product color	Black
Number of drum pads	16
Built-in optical drive	No
USB version	3.2 Gen 1 (3.1 Gen 1)
Audio (L/R) out	2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
USB ports quantity	3
Headphone connectivity	3.5 mm
Cables included	USB

Weight and Dimensions

Depth	223 mm
Width	410 mm
Height	67.5 mm
Weight	2721.55 g