484
WayOutWare Odyssey (continued)
Echo
Use this tab to adjust the settings for the tape echo effect.
Parameter Description Value Range
Delay Use the switch in the bottom-left corner to enable or
disable the delay effect.
Off, On
Sync
Enable to sync the Echo Time to the Global Tempo, or
disable to adjust the Echo Time by milliseconds.
Off, On
Sustain Length of time that the echo continues playing. 0.0–100.0%
Echo Mix Adjusts the wet/dry amount between the original sound
and the echo.
100% Synth – 50/50%
– 100% Echo
Echo Time Amount of time between the dry signal and the delayed
signal. Use the slider or the Echo Time field to change the
value.
When Sync is Off:
When Sync is On:
0.02 – 5.00 seconds
1/64 – 4/4