Allied Telesis SwitchBlade x3100 Series User Manual

CFC Media (SD Card) Introduction
1-93
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
2
show file sd5:
-------------------------------------------------------------------------------
File.................................. Size KiB
-------------------------------------- ---------------------------------------
D104_14.1.0.cfg.................. 62
DBBackupTR15.db....................... 670
cfc200_14.1.0.GAMMA.20100208.tar...... 13366
rob.tar............................... 2097
rob1.tar.............................. 2097
rob12.tar............................. 2053
xe4_14.1.0.GAMMA.20100111.tar......... 2053
xe4_14.1.0.GAMMA.20100118.tar......... 2054
Capacity KiB.......................... 1985024
Total Displayed KiB................... 24455
Available KiB......................... 1960160
Copy a file from flash to an SD card and renaming it
3
copy file D104_14.1.0.cfg to
sd5:D104_old.cfg
Info (033019): Successfully copied file
D104_14.1.0.cfg to D104_old.cfg media sd5
Copies file “D104_14.1.0.cfg” from the local
flash to the SD5 media card and changes the
filename to “D104_old.cfg“.
Verify that file was copied and renamed
4
show file sd5:
-------------------------------------------------------------------------------
File.................................. Size KiB
-------------------------------------- ---------------------------------------
D104_14.1.0.cfg....................... 62
D104_old.cfg..................... 62
DBBackupTR15.db....................... 670
cfc200_14.1.0.GAMMA.20100208.tar...... 13366
rob.tar............................... 2097
rob1.tar.............................. 2097
rob12.tar............................. 2053
xe4_14.1.0.GAMMA.20100111.tar......... 2053
xe4_14.1.0.GAMMA.20100118.tar......... 2054
Capacity KiB.......................... 1985024
Total Displayed KiB................... 24518
Available KiB......................... 1960096
Copy a file from an SD card to flash and renaming it
5
copy file sd4:D104.cfg to D104_today.cfg
Info (033006): Successfully copied file D104.cfg to
D104_today.cfg card 4
Info (033011): Successfully transferred file:
D104_today.cfg to card 5
Copies file “D104.cfg” from the SD4 media card
to the flash on both CFCs (card 4 and card 5)
and changes the filename to “D104_today.cfg“.
TABLE 1-13 Procedure - Transferring File between Flash and SD Card
Step Command Description/Notes

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English