Commands for Software Load Management Introduction
1-119
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SHOW BOOTSERVER
Syntax
SHOW BOOTSERVER
Description Displays the static IP address of the network boot server, and the preferred software load
file which is downloaded from the server when all boot attempts for the CFC fail from
the CFC flash file system.
Options N/A
Example SHOW BOOTSERVER
-------------------------------------------------------------------------------
Network Boot Host IP..... 10.52.65.38
Network Boot Load........ cfc200_14.2.0.GAMMA.20100716.tar
Network Boot Path........ x3112Files/
-------------------------------------------------------------------------------
To Next Page
Loading...
