Logging Procedures Introduction
1-169
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
DELETE LOG FILTER
Syntax
DELETE LOG FILTER={filterid-list|ALL} OUTPUT=outputid
Description Used to remove the association between management log filters and a management log
output destination. Upon successful execution of this command, the specified manage-
ment log filters are removed from the management log output destination. The manage-
ment log output destination will no longer receive logs that match the filter criteria in the
log filters that were removed.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE LOG FILTER=rmon_filter OUTPUT=terminal
Option Description Default Value
FILTER The name of a previously created filter to delete. N/A
OUTPUT The name of the output destination. This was created
with the CREATE LOG FILTER command.
To Next Page
Loading...
