Introduction Logging Procedures
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-170
DESTROY LOG FILTER
Syntax
DESTROY LOG FILTER={filterid-list|ALL}
Description Removes management log filters from the system. Upon successful completion of this
command, the specified management log filter is completely removed from the system.
The log filter is also removed from all log output destinations that have had the filter
added with the ADD LOG FILTER command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY LOG FILTER=rmon_filter
Option Description Default Value
FILTER Name given for the log filter.
To Next Page
Loading...
