Allied Telesis SwitchBlade x3100 Series - Page 201

Logging Procedures Introduction
1-171
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
DESTROY LOG OUTPUT
Syntax
DESTROY LOG OUTPUT={outputid-list|ALL}
Description Removes existing management log output destinations from the system. CLI output desti-
nations are automatically destroyed when the user logs out of his/her session. Upon suc-
cessful completion of this command, the specified management log destination is
completely removed from the system.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY LOG OUTPUT=terminal
Option Description Default Value
OUTPUT