Configuration Guidelines Configuring the GE24POE Card
3-7
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
Set the priorities on the ports with Class 4 devices.
2
SET POE INTERFACE=0.0-0.14, 1.0-1.14
PRIORITY=CRITICAL
Changes the priority of the ports from LOW to
CRITICAL for ports on slot 0 and slot 1.
Set the power limit on the Class 4 devices in slot 1.
3
SET POE INTERFACE=1.0-1.14 POWER-
LIMIT=2200MW
Modifies the power limit on ports 1.0-1.14 to a
maximum of 22W.
Set the PoE threshold for the shelf.
4
SET POE THRESHOLD=80 Monitors the power usage on the shelf by sending
an alarm when the threshold is exceeded.
Show the current status of the ports on the selected interface.
5
SHOW POE INTERFACE=0.*, 1.* Displays the current configuration of the ports.
TABLE 3-3 Configuration procedure for PoE
Step Command Description
To Next Page
Loading...
Need help?
General
