Configuration Guidelines Configuring the GE24POE Card
3-11
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
RESET POE COUNTER INTERFACE
Syntax
RESET POE COUNTER INTERFACE [ ={ type:id-range | id-range | ifname-
list | ALL } ]
Description Resets the counters for the POE interface(s).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example RESET POE COUNTER INTERFACE=1.23
Option Description Default Value
INTERFACE A logical representation of one or more physical ports
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL - all applicable interfaces in the system
To Next Page
Loading...
