Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring the Forwarding Database
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-12
CLEAR SWITCH FDB (VLAN)
Syntax
CLEAR SWITCH FDB [INTERFACE={type:id-range|id-range|ifname-list|
ALL}] [ADDRESS=macaddress] [VLAN={vlanname|vid}]
Description Clears the contents of the Forwarding Database for the specified VLAN.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example CLEAR SWITCH FDB INTERFACE=8.0 VLAN=123
Option Description Default Value
INTERFACE The interface from which the MAC address was learned N/A
MAC Address A specific MAC address as learned from the source
address field of a frame. Example: 00:0C:25:00:13:8C
ALL - All learned
MAC addresses
VLAN The VID Identifier for the VLAN. N/A

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English