Configuring the Forwarding Database Introduction
4-13
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DISABLE SWITCH AGEINGTIMER
Syntax
DISABLE SWITCH AGEINGTIMER
Description Disables the ageing timer from ageing out dynamically learned entries in the Forwarding
Database. The default setting for the ageing timer is enabled.
If the switch finds no matching entries in the Forwarding Database during the Forwarding
Process, then all switch interfaces in the VLAN/HVLAN will be flooded with the packet
(except the interface on which the packet was received).
Note: Disabling the switch ageing timer is not recommended.
Options None
Example
DISABLE SWITCH AGEINGTIMER
To Next Page
Loading...
