Introduction Configuring the Forwarding Database
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-16
ENABLE SWITCH LEARNING
Syntax
ENABLE SWITCH LEARNING
Description Enables the dynamic learning and updating of the Forwarding Database. The default set-
ting for the learning function is enabled. If the switch finds no matching entries in the For-
warding Database during the Forwarding Process, then all switch interfaces in the VLAN/
HVLAN will be flooded with the packet, except the interface on which the packet was
received.
Options None
Example
ENABLE SWITCH LEARNING
To Next Page
Loading...
