Allied Telesis SwitchBlade x3100 Series User Manual

Configuring Standard VLANs Introduction
4-55
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DELETE VLAN INTERFACE
Description Removes the interface association from the specified Virtual LAN (VLAN). Once an
untagged port is disassociated with all user-defined VLANs, it is automatically added to
the default VLAN (VID=1). A user cannot remove the association between the default
VLAN and an untagged port if the port has no other HVLAN/VLAN associations.
Syntax
DELETE VLAN={ vlanname-list | vid-range } INTERFACE={ type:id-range
| id-range | ifname-list | ALL }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
DELETE VLAN=4004 INTERFACE=0.23
Option Description Default Value
VLAN A comma-delimited list of VLAN names or VLAN
number range (e.g., 4-6).
N/A
INTERFACE The interface that is being disassociated with the
VLAN.
N/A

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English