Allied Telesis SwitchBlade x3100 Series - Page 376

Introduction Configuring Standard VLANs
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-56
DESTROY VLAN
Description Destroys the specified Virtual LAN (VLAN) or all VLANs in the switch. The default
VLAN (VID=1) cannot be destroyed. If ALL is specified then all VLANs except the
default VLAN are destroyed. A VLAN cannot be destroyed if interfaces still belong to it.
Syntax
DESTROY VLAN={ vlanname-list | vid-range | ALL }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
DESTROY VLAN=4004
Option Description Default Value
VLAN A comma-delimited list of VLAN names or VLAN
number range (e.g., 4-6).