Allied Telesis SwitchBlade x3100 Series User Manual

Configuring BPDU Cop Introduction
4-97
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
ADD STP INSTANCE VLAN
Description For MSTP. By default, all VLANs (and therefore all ports), belong to the Common STP
instance, the CIST. Once created, VLANs can be associated with the MSTI using this
command: (VLANs can also be dis-associated with the MSTI as well.) The user can con-
tinue to associate VLANs with MSTIs until there are no VLANs associated with the CIST.
Syntax
ADD STP INSTANCE={ stpname | mstid } VLAN={ vlanname | vid-range }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example ADD STP INSTANCE=mst9 VLAN=420
Option Description Default Value
INSTANCE The name of the Multiple Spanning Tree instance
(MSTI) to create
VLAN The name or numerical VLAN identifier. 1-4094

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English