Allied Telesis SwitchBlade x3100 Series - Page 420

Introduction Configuring BPDU Cop
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-100
DELETE STP INSTANCE VLAN
Syntax
DELETE STP INSTANCE={ stpname | mstid | ALL } VLAN={ vlanname |
vid-range | ALL }
Description Disassociates a VLAN (range) with an STP instance. Once all VLANs are disassociated,
the instance can be destroyed
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example DELETE STP INSTANCE=mstd9 VLAN=420
Option Description Default Value
INSTANCE The spanning tree instance(s) that will have VLANs
removed.
N/A
VLAN The VLAN(s) that will be removed from the instance.