Configuring BPDU Cop Introduction
4-101
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DELETE TRACE STP
Syntax
DELETE TRACE STP [ INSTANCE={ stpname | mstid | MAIN | ALL } ] [
EVENT={ BPDU | ALL } ] [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ]
Description Removes specified trace criteria for STP traces.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example DELETE TRACE STP INSTANCE 2
Option Description Default Value
INSTANCE The instance form which the trace will be deleted. N/A
EVENT All events or BPDUs 0.0.0.0
INTERFACE The interface(s) where the trace will be removed. If no IP address is
supplied, the natu-
ral mask of the IP
address is used.
To Next Page
Loading...
