Allied Telesis SwitchBlade x3100 Series - Page 422

Introduction Configuring BPDU Cop
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-102
DESTROY STP INSTANCE
Syntax
DESTROY STP INSTANCE={ stpname | mstid | ALL }
Description Once all relevant VLANs are disassociated with the STP instance, the Instance itself can
be destroyed. (You cannot destroy to default STP instance, or CIST.)
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example DESTROY STP INSTANCE=mstd9
Option Description Default Value
INSTANCE The instance to be destroyed.