Allied Telesis SwitchBlade x3100 Series - Page 478

Introduction EPSR and (R)STP Interaction
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-158
DISABLE EPSR
Description Used to disable the EPSR domain.
Syntax
DISABLE EPSR={ epsrdomain-list | ALL }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
DISABLE EPSR=allied
Option Description Default Value
EPSR The name(s) that has been given to the EPSR
domain(s)
NA