Introduction Configuring an Alias
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-18
DESTROY ALIAS
Syntax
DESTROY ALIAS={ aliasname-list | ALL }
Description Allows the user to remove an existing alias from the persisted list of alias commands.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DESTROY ALIAS=su,manage
Option Description Default Value
ALIAS The name of the alias for the command string.
Specifies the case-insensitive literal string which is to be
destroyed. This command may be executed by users
with a MANAGER privilege level or higher.
The value can be one alias, more then one alias sepa-
rated by a comma, or ALL.
To Next Page
Loading...
