Configuring VLAN Based HVLAN Introduction
4-197
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
ADD VLANTUNNELMAP VLAN HVLAN
Syntax
ADD VLANTUNNELMAP VLAN={ vlanname-list | vid-range } HVLAN={ hvlan-
name | vid }
Description Makes the association of the VLAN to a VLAN-based HVLAN tunnel. The tunnel is
defined by the HVLAN and its interface membership.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
ADD VLANTUNNELMAP VLAN=VOICE HVLAN=S_300
Option Description Default Value
VLAN The list of provisioned VLAN names, separated by a
comma, or the range of provisioned VLAN IDs that are
to be mapped to the HVLAN tunnel
N/A
HVLAN The HVLAN name or id that represents the tunnel. N/A
To Next Page
Loading...
