Allied Telesis SwitchBlade x3100 Series - Page 524

Introduction Configuring VLAN Based HVLAN
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-204
SHOW VLANTUNNELMAP
Syntax
SHOW VLANTUNNELMAP [ VLAN={ vlanname-list | vid-range | ALL } ] [
HVLAN={ hvlanname-list | vid-range | ALL } ]
Description Shows the VLAN to HVLAN associations for VLAN based HVLANs
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SHOW VLANTUNNELMAP
--- Vlan Tunnel Map Configuration ---
HVLAN Tunneled VLANs
---------- --------------------------------------------------------------
300 21-30
Option Description Default Value
VLAN The list of provisioned VLAN names, separated by a
comma, or the range of VLAN IDs.
ALL - All VLANs that are associated with HVLANs
ALL
HVLAN The list of provisioned HVLAN names, separated by a
comma, or the range of HVLAN IDs.
ALL - All HVLANs that have association with VLANs.
ALL