Configuring a TACACS+ Server Introduction
6-91
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
DELETE TACPLUS SERVER (SEC)
Syntax
DELETE TACPLUS SERVER={ ipaddress-list | hostname-list | ALL }
Description Used to remove TACACS+ servers from the system. Once removed, user authentication
requests are no longer sent to those servers.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE TACPLUS SERVER=168.10.10.10
Option Description Default Value
SERVER The comma-separated ipaddress list or hostname list. ALL
To Next Page
Loading...
