Introduction Configuring a TACACS+ Server
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-92
DISABLE TACPLUS SERVER (SEC)
Syntax
DISABLE TACPLUS SERVER={ ipaddress-list | hostname-list | ALL }
Description Disables one or more TACACS+ servers for use in user authentication requests. Once
disabled, the TACACS+ server(s) are not used for user authentication requests.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DISABLE TACPLUS SERVER=168.10.10.10
Option Description Default Value
SERVER The comma-separated ipaddress list or hostname list. ALL
To Next Page
Loading...
