Introduction Configuring Port Authentication
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-110
DELETE TRACE AUTHDEBUG
Syntax
DELETE TRACE AUTHDEBUG INTERFACE={ type:id-range | id-range |
ifname-list | ALL } EVENT={ { EAPOL | AUTHSERVER | ACCT } [ ,... ]
| ALL }
Description Deletes various tracing parameters for port authentication.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE TRACE AUTHDEBUG
Info (010017): Operation Successful
officer SEC>> SHOW TRACE AUTHDEBUG
---------------------------------------
No information to display from settings provided
---------------------------------------
Option Description Default Value
INTERFACE The ethernet interfaces over which the trace will be
added.
ALL
EVENT Specifies the type of Port Authentication trace to add:
EAPOL - The EAP messages sent and received between
the supplicant and the authenticator (SBx3112).
AUTHSERVER - The Authorization RADIUS packets
sent and received between the RADIUS server and the
authenticator (SBx3112).
ACCT - The accounting messages processed by the
RADIUS server.
ALL - All types of traces are included.
[ ,... ] Any combination of the Event types can be inserted
here, separated by a comma.
To Next Page
Loading...
