Introduction Configuring SSH
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-150
SHOW SSH KEY (SEC)
Syntax
SHOW SSH KEY [ =keyname ]
Description Displays a list of available HOST_KEYs or user keys
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example To be Supplied
Option Description Default Value
KEY Used to specify the key that is shared with the
TACACS+ server for use in authentication requests.
The secret must be an alphanumeric string of 64 charac-
ters or less in length.
To Next Page
Loading...
