Allied Telesis SwitchBlade x3100 Series - Page 711

Configuring SSH Introduction
6-151
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
SHOW SSH SERVER (SEC)
Syntax
SHOW SSH SERVER [ COUNTERS ]
Description Displays the SSH configuration and status of the SSH server. If the COUNTERS option is
used, a list of the SSH-specific counters and their value is also displayed
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SHOW SSH SERVER COUNTERS
--- Secure Shell Configuration ------------------------------------------------
SSH Version.......................... SSH-2
Server Enabled....................... No
Port................................. 22
Host Key ID.......................... None
Host Key Length (bits)............... Unknown
Login Timeout (seconds).............. 600
Allowed Authentications.............. password
Required Authentications............. password
Secure Shell Counters
inOctets................. 0 outOctets................. 0
RxPkts................... 0 TxPkts.................... 0
Receive Counters............... Transmit Counters...............
RxSSHMsgDisconnect............ 0 TxSSHMsgDisconnect............. 0
RxSSHMsgIgnore................ 0 TxSSHMsgIgnore................. 0
RxSSHMsgUnimplemented......... 0 TxSSHMsgUnimplemented.......... 0
RxSSHMsgDebug................. 0 TxSSHMsgDebug.................. 0
RxSSHMsgServiceRequest........ 0 TxSSHMsgServiceRequest......... 0
RxSSHMsgServiceAccept......... 0 TxSSHMsgServiceAccept.......... 0
RxSSHMsgKexInit............... 0 TxSSHMsgKexInit................ 0
RxSSHMsgNewKeys............... 0 TxSSHMsgNewKeys................ 0
RxSSHMsgKexDhInit............. 0 TxSSHMsgKexDhInit.............. 0
RxSSHMsgKexDhReply............ 0 TxSSHMsgKexDhReply............. 0
RxSSHMsgUserAuthRequest....... 0 TxSSHMsgUserAuthRequest........ 0
RxSSHMsgUserAuthFailure....... 0 TxSSHMsgUserAuthFailure........ 0
RxSSHMsgUserAuthSuccess....... 0 TxSSHMsgUserAuthSuccess........ 0
Option Description Default Value
COUNTERS Displays a list of the SSH-specific counters and their val-
ues.