Configuring DHCP Relay Introduction
7-15
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7
show dhcprelay x3112
--- DHCP Agent Settings for instance: x3112 -----------------------------
Mode CID Format Shelf ID Remote ID Servers VLAN Vid list
----- ---------- ------------- ------------ ----------- ------------
RELAY AUTO EC:CD:6D:03:10:CB x3112 10.52.65.38 420
Interface Information
----------------------
(output omitted)
Enable ageing on a customer interface (optional)
8
set dhcprelay interface 0.21 ageing on Enables ageing for learned DHCP client MAC/IP
filters on interface 0.21.
Enable IP filtering on customer interface (optional). Once enabled, the system automatically generates internal classifiers
associated with the fitered traffic.
TABLE 7-2 Configuration Procedure - Creating/Destroying DHCP Relay Agent
Step Command Description
To Next Page
Loading...
