Introduction Configuring DHCP Relay
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-16
9
set dhcprelay interface 0.21 filter on
Info (040788): Phase 1/2 completed for
VLAN 420 on instance 'ALL' and was
applied to all applicable interfaces
on card 0.
Info (040789): Phase 1/2 for VLAN 420
on instance 'ALL' finished processing.
Info (040790): Phase 2/2 completed for
ALL VLANs on instance 'ALL' and was
applied to all applicable interfaces
on card 0.
Info (040791): Phase 2/2 for ALL VLANs
on instance 'ALL' finished processing.
Info (040795): DHCP IP Filtering is
now 'ON' for ALL requested interfaces.
officer SEC>> Info (010017): Opera-
tion Successful
Enables IP filtering on interface 0.21 for learned
MAC addresses that have been assigned IP
addresses from the DHCP servers.
View classifier data (e.g., name, match rules, and actions) for filtered interface
TABLE 7-2 Configuration Procedure - Creating/Destroying DHCP Relay Agent
Step Command Description
To Next Page
Loading...
