Allied Telesis SwitchBlade x3100 Series - Page 761

Configuring DHCP Relay Introduction
7-23
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
ADD DHCPRELAY VLAN
Syntax
ADD DHCPRELAY={ dhcpname | MAIN } VLAN={ vlanname-list | vid-range
| ALL }
Description Adds a VLAN (or set of VLANs) to the DHCPRELAY instance.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
ADD DHCPRELAY=X3112 VLAN=420
Option Description Default Value
DHCPRELAY The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
N/A
VLAN The name or numerical VLAN identifier being added to
the DHCP relay instance.
vlanname-list - list of specific VLAN(s) separated by a
comma
vid-range - VLAN range of IDs
ALL - all VLANs
N/A