Introduction Configuring LLDP
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-86
SET LLDP
Syntax
SET LLDP
[ TXINTERVAL=5..32768 ]
[ TXHOLD=2..10 ]
[ TXDELAY=1..8192 ]
[ REINITDELAY=1..10 ]
[ NOTIFYINTERVAL=5..3600 ]
Description Sets the global LLDP values
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SETT LLDP
NOTIFYINTERVAL=3600
Option Description Default Value
LLDP value Refer to Tab le 7 -9 .
To Next Page
Loading...
