Allied Telesis SwitchBlade x3100 Series User Manual

Routine Procedures Database Management
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
8-56
In the unlikely event that this situation occurs, the user should capture all management, error, and crash logs,
then contact Allied Telesyn Technical Support. Note that while this alarm is present any configuration data that
is entered by the user may not be stored in the database.
TABLE 8-11 Database Commands Summary
Noun Verb Syntax Description
DATABASE BACKUP
BACKUP
DATABASE
FILE={ destinationfile
| unit:destinationfile
| serverpath/destinationfile
}
[ { TFTP
SERVER={ ipaddress
| hostname
}
| ZMODEM
| FTP
SERVER={ ipaddress
| hostname
}
USER=userid
PASSWORD=password
} ]
The BACKUP DATABASE command backs up
the contents of the system configuration data-
base to a file on an external network server.
TRANSFER SHOW SHOW
TRANSFER
[ ={ transferid-list
| ALL
} ]
Displays the status and progress of a file transfer.
DATABASE PURGE PURGE
DATABASE
[ FORCE ]
The PURGE DATABASE command purges all
contents in the system configuration database
and then automatically restarts the control mod-
ule.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English