Configuring the Management Interfaces Introduction
1-63
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
DELETE IP INTERFACE
Syntax
DELETE IP INTERFACE={ MGMT | type:id-range | ifname-list | ALL } [
FORCE ]
Description Deletes the MGMT or VLAN interface
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE IP INTERFACE=MGMT
Option Description Default Value
INTERFACE The interfaces that have been defined.
FORCE Overrides the confirmation message.
To Next Page
Loading...
