Programming with Interoperability and Guardrails™ Suite MX
BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual 131
The pre-population of infusion parameters workflow for subsequent bags is unchanged from the initial
bag; scan patient, scan medication label, scan pump module, see Programming with Interoperability —
Initial Primary Infusion on page 12
3. The infusion parameters for the subsequent bag must meet the
required matching criteria. If the matching criteria are met, the infusio
n parameters are pre-populated on
the PCU without interruption of the currently running infusion.
The following procedures a
ssume that the pump module has already been programmed with an Initial
Primary Infusion.
NOTE:
If an infusion is in Delay when a subsequ
ent automated programming request is sent and matching
criteria:
• Are met, the Delay is canceled and th
e subsequent automated programming request infusion
parameters are pre-populated on the PCU. To add a Delay manually, refer to Delay Options on
page 155.
• Are not met, the automated programming request is rejected and the infusion remains in Delay.
The generic workflow for pre-population of infusion parameters is as follows. Contact your EMR/HIS
vendor for detailed instructions.
1. Using the EMR/HIS system scanne
r used
for barcode medication administration:
• Scan the Patient's ID Band
• Scan the fluid/medication barco
de label
• Scan the barcode label on the pu
mp module
2. To indicate that information has been noted and to continue programming, press
the CONFIRM soft key
on the PCU.
If the hospital has defined a Clinical Advisory for the
drug, a message will appear.
NOTE:
If the infusion parameters are unable to be pre-populated on the system,
error messages will be displayed
in the EMR/HIS. Error messages will not be displayed on the PCU. Consult the EMR/HIS.
3. Start the applicable infusion as described in the following procedures:
Programming a Continuous Infusion on pa
ge 91
Infusion on page 116
Intermittent
Infusion on page 129
A
>Press CONFIRM
Clinical Advisory:
CONFIRM
Alteplase
Stroke
This dosing is for Acute
Ischemic STROKE
To Next Page
Loading...
