BD Alaris - Troubleshooting and Maintenance; Errors and Messages; Errors; Messages

Troubleshooting and Maintenance
BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual 321
Troubleshooting and Maintenance
Errors and Messages
Alarms and Alerts: See Appendix A, Troubleshooting and Maintenance on page 324 for the following
system references:
• Alarms and Alerts
• Audio Characteristics
• Definitions
• Display Color
• Radio Frequency Note
Errors
Messages
Error Meaning Response
Clinician ID is invalid Clinician ID is not recognized. Ensure that ID label is legible. Enter ID
manually.
Patient ID is invalid Patient ID is not recognized. Ensure that ID label is legible. Enter ID
manually.
Scanned label is invalid Profile feature might be disabled.
Barcode might not be readable or a
supported symbology.
Ensure that profile is enabled. Ensure that
ID label is legible. Inform pharmacy of
problem.
Scanned medication label is
invalid
Barcode might not be readable or a
supported symbology.
Ensure that ID label is legible. Inform
pharmacy of problem.
Message Meaning Response
Drug or Fluid not in current Profile Drug and its concentration might not
be in currently selected profile.
Ensure that correct profile is selected and
that it has correct drug and concentration.
Channel Unavailable Channel is currently infusing and
cannot support scanned infusion.
If secondary infusion was scanned, select a
channel with a primary infusion that
supports the secondary
. If primary
infusion was scanned, select an idle
channel to program.
Patient ID will be changed The Patient ID is not the same
Patient ID that is currently
associated with the device.
If the Patient ID associated to the PCU
should be changed, press
Yes . If the
Patient ID associated to the PCU should
not be changed, press
No .