BD Alaris - Channel Options; Changing Limit Mode

Chapter 5—Alaris™ SpO
2
Module Models 8210 and 8220
266 BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual
Channel Options
Changing Limit Mode
The following procedure can be performed only when the Guardrails suite MX is not enabled (profile
option not being used for programming).
1. Press
Limit Mode soft key.
2. To change Limit Mode Setup, press applicable soft key.
OR
To leave Limit Mode Setup unchanged and return to SPO2 Main display, press EXIT soft key.
A A
Adult
Neonatal
Limit Mode Setup
EXIT
>Select an Option or
EXIT