Programming
BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual 225
4. Press CHANGE MODE soft key.
5. Select desired infusion mode.
6. Continue programming. See the applicable procedure:
Setting Up PCA Dose Only on page 213
Setting Up Continuous Infusion Only on pa
ge 215
Setting Up PCA Dose and Continuous Infusion on page 218
7.
Verify or change program set
tings and press CONFIRM soft key.
8. Close and lock door.
9. Verify correct programming parameters on summary screen and press
START soft key.
NOTE:
Previously programmed values are carried over to new program.
Viewing Patient History
1. Press CHANNEL SELECT key.
2. From Main Display, press
OPTIONS key.
3. Press
PATIENT HISTORY soft key.
A
25
mg/4 h
CONT
DOSE
[Conc]: 1 mg/mL
MAX
LIMIT
2 mg/h
CHANGE
MODE
Guardrails Drug Setup
IMS Pre-fill 30mL
20
minutes
LOCKOUT
INTERVAL
2 mg
PCA
DOSE
>Press CONFIRM
CONFIRM
A
>Select an Option or
EXIT
EXIT
Dose
Request Setup
Infusion
Modes
Patient History
PCA Pause Limits
Drug Event
History
Channel Options
1 of 2
PAGE
DOWN
To Next Page
Loading...
