Chapter 2—BD Alaris™ PCU Model 8015 and Alaris™ PCU Model 8015
58 BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual
System Configuration Settings
If the configuration settings need to be changed from the Factory default settings, refer to the applicable
technical service manual or contact CareFusion technical support for technical, troubleshooting, and
preventive maintenance information.
With the profiles feature enabled, the settings are configured independently for each profile. A
hospital-defined, best practice data set must be uploaded to the PCU to enable the profiles feature. Date
and time is a system setting and is the same in all profiles. Before selecting settings, it is recommended that
the hospital conduct a risk assessment or other hospital-defined best practice.
Feature Default Setting Options
Alarm Audio Profile 1 Profile 1, 2, 3, or 4
Anesthesia Mode Disabled Enabled - Disabled
Battery Meter Disabled Enabled - Disabled
Clock Setup (
Date and Time
) Not Applicable Set date and time
Key Click Audio Enabled Enabled - Disabled
Max Patient Weight 500 kg 0.1 - 500 kg
Patient ID Entry Disabled Enabled - Disabled
PM
Reminder
(Preventive Maintenance)
Enabled Enabled - Disabled
Profiles Disabled Enabled - Disabled
Tamper Resist Disabled Enabled - Disabled
To Next Page
Loading...
