BD Alaris - Starting Secondary Infusion

Programming
BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual 315
Starting Secondary Infusion
Starting a secondary infusion while a primary infusion is in progress.
1. To scan barcode on IV container, press
SCAN/CANCEL key on auto-ID module or scan trigger on auto-
ID handheld scanner.
The PCU displays the scanned medication/fluid information.
2. Press
CHANNEL SELECT key on appropriate module.
Primary infusion parameters display.
3. Press
Secondary soft key.
4. Program secondary infusion (see BD Alaris™ Pump Module Model 8100,
Alaris™ Pump Module
Model 8100, and Alaris™ Syringe Module Model 8110 on pa
ge 61).
CAUTION
CAUTION
• CLASS 1 LED PRODUCT: Do not stare into the beam or allow beam to strike patient's face.
• Always verify that information
displayed on the PCU matches scanned data.