BD Alaris - Changing Sensitivity Mode

Chapter 5—Alaris™ SpO
2
Module Models 8210 and 8220
270 BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual
Changing Sensitivity Mode
1. Press Sensitivity Mode soft key.
2. To change Sensitivity Mode, press applicable soft key.

• Normal: Normal patient monitoring.
•
Maximum: Improved low perfusion performance.
NOTE:
 The sensitivity mode is displayed on the SPO2 Main display only when maximum is selected.
(8220)
A
Pulse Beep Volume: Off
Sat. Averaging Time: 8
Limit Mode: Adult
Channel Options
>Select an Option or
EXIT
EXIT
Sensitivity Mode: Normal
A
A
Normal
Maximum
Sensitivity Mode
EXIT
>Select an Option or
EXIT