BD Alaris - Page 88

Chapter 3—BD Alaris™ Pump Module Model 8100, Alaris™ Pump Module Model 8100, and Alaris™
Syringe Module Model 8110
74 BD Alaris
TM
System with Guardrails
TM
Suite MX User Manual
2. Open syringe barrel clamp.
a. Pull syringe barrel clamp out and hold.
b.
Rotate clamp to left (clockwise or counter
clockwise) until it clears syringe chamber.
c. Gently release clamp.
3. Raise the drive head to its fully extended position.
a. Twist gripper control clockwise and hold in position.

b. While holding gripper control in open position, raise the drive head to full extension.
c. Gently release gripper control.
A
L
A
R
M
IN
FU
S
E
ST
A
N
D
B
Y
CHANNEL
SELECT
PAUSE
RATE (mL/h)
Syringe Barrel Clamp Open
Drive Head Fully Extended
Gripper Control/Drive
Head Release in Open
Position
Plunger Grippers Open