6-362
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
This alarm occurs when a device is restarted via the Restart button in Cisco Unified CM Administration
window or when a system administrator presses the Apply Config button for a device that does not
support conditional restart. Restart causes the device to unregister, receive updated configuration, and
reregister with Cisco Unified Communications Manager (Unified CM) without shutting down. A device
can be restarted only when it is registered with Unified CM.
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Informational (6)
Parameters
Device name [Optional]. [String] Device type. [Optional] [Enum] Product type [String]
Enum Definitions for DeviceType
History
Cisco Unified Communications
Release Action
8.0(1)
• Enum Definitions for DeviceType are updated.
• Parameters added: Product type [String]
Code Device Type
10 CISCO_VGC_PHONE
11 CISCO_VGC_VIRTUAL_PHONE
30 ANALOG_ACCESS
40 DIGITAL_ACCESS
42 DIGITAL_ACCESS+
43 DIGITAL_ACCESS_WS-X6608
47 ANALOG_ACCESS_WS-X6624
48 VGC_GATEWAY
50 CONFERENCE_BRIDGE
51 CONFERENCE_BRIDGE_HARDWARE
52 CONFERENCE_BRIDGE_HARDWARE_HDV2
53 CONFERENCE_BRIDGE_HARDWARE_WS-SVC-CMM
62 H323_GATEWAY
70 MUSIC_ON_HOLD
71 DEVICE_PILOT
73 CTI_ROUTE_POINT
To Next Page
Loading...
Need help?
General