Cisco MCS-7825-H3-IPC1 User Manual

6-31
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Preconfigured System Alarm Notifications
SystemVersionMismatched
This alert occurs when a mismatch in system version exists.
TotalProcessesAndThreadsExceededThreshold
This alert occurs when the TotalProcessesAndThreadsExceededThreshold event gets generated. The
alert indicates that the current total number of processes and threads exceeds the maximum number of
tasks that are configured for the Cisco RIS Data Collector Service Parameter. This situation could
indicate that a process is leaking or that a process has thread leaking.
Enable E-mail Selected
Trigger Alert Action Default
Table 6-20 Default Configuration for the SyslogStringMatchFound RTMT Alert (continued)
Value Default Configuration
Table 6-21 Default Configuration for the SystemVersionMismatched RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
SystemVersionMismatched occurred
Duration Trigger alert immediately
Frequency Trigger up to 1 alert within 60 minutes
Schedule 24 hours daily
Enable E-mail Selected
Trigger Alert Action Default
Table 6-22 Default Configuration for the TotalProcessesAndThreadsExceededThreshold RTMT
Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
TotalProcessesAndThreadsExceededThreshold event generated

Cisco MCS-7825-H3-IPC1 Specifications

General

Brand	Cisco
Model	MCS-7825-H3-IPC1
Category	Software
Language	English