7-132
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CDP-MIB
}
cdpInterfaceExtendedTrust OBJECT-TYPE
SYNTAX INTEGER {trusted(1), noTrust(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates the value to be sent by Extended Trust TLV. If trusted(1) is configured, the value of
Extended Trust TLV is one byte in length with its least significant bit equal to 1 to indicate extended
trust. All other bits are 0. If noTrust(2) is configured, the value of Extended Trust TLV is one byte
in length with its least significant bit equal to 0 to indicate no extended trust. All other bits are 0.
::= { cdpInterfaceExtEntry 1 }
cdpInterfaceCosForUntrustedPort OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Indicates the value to be sent by COS for Untrusted Ports TLV.
::= { cdpInterfaceExtEntry 2 }
CDP Address Cache Group
cdpCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
The (conceptual) table containing the cached information obtained via receiving CDP messages.
::= { cdpCache 1 }
cdpCacheEntry OBJECT-TYPE
SYNTAX CdpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
An entry (conceptual row) in the cdpCacheTable, containing the information received via CDP on
one interface from one device. Entries appear when a CDP advertisement is received from a
neighbor device. Entries disappear when CDP is disabled on the interface, or globally.
INDEX { cdpCacheIfIndex, cdpCacheDeviceIndex }
::= { cdpCacheTable 1 }
CdpCacheEntry ::= SEQUENCE {
To Next Page
Loading...
Need help?
General