6-68
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
Recommended Action
Review the System Reports provided in the Cisco Unified Reporting tool, specifically the Cisco Unified
CM Database Status report, for any anomalous activity. Check network connectivity to the server that is
running the database. If your system uses DNS, check the DNS configuration for any errors.
InvalidCredentials
Credential Failure to IME server.
The connection to the IME server could not be completed, because the username and/or password
configured on Unified CM do not match those configured on the IME server.
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
ALERT
Recommended Action
The alarm will include the username and password which were used to connect to the IME server, along
with the IP address of the target IME server and its name. Log into the IME server and check that the
username and password configured there match those configured in Unified CM.
Routing List
SDL
SDI
Sys Log
Event Log
Alert Manager
Parameter(s)
User name(String)
IP address(String)
Server name(String)
History
Cisco Unified Communications
Release Action
8.0(1) New Alarm for this release.
To Next Page
Loading...
Need help?
General