6-45
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Preconfigured CallManager Alarm Notifications
MaliciousCallTrace
This indicates that a malicious call exists in Cisco Unified Communications Manager. The malicious call
identification (MCID) feature gets invoked.
MediaListExhausted
This alert occurs when the number of MediaListExhausted events exceeds the configured threshold
during the configured time interval. This indicates that all available media resources that are defined in
the media list are busy. The default specifies 0 within 60 minutes.
Threshold Trigger alert when following condition met:
TFTP server heartbeat rate below 24 beats per minute
Duration Trigger alert immediately
Frequency Trigger alert on every poll
Schedule 24 hours daily
Enable E-mail Selected
Trigger Alert Action Default
Table 6-42 Default Configuration for the LowTFTPServerHeartbeatRate RTMT Alert (continued)
Value Default Configuration
Table 6-43 Default Configuration for the MaliciousCallTrace RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Critical
Enable/Disable this
alert on the
following servers
Enabled on listed servers
Threshold Trigger alert when following condition met:
Malicious call trace generated
Duration Trigger alert immediately
Frequency Trigger alert on every poll
Schedule 24 hours daily
Enable E-mail Selected
Trigger Alert Action Default
Table 6-44 Default Configuration for the MediaListExhausted RTMT Alert
Value Default Configuration
Enable Alert Selected
Severity Warning
To Next Page
Loading...
Need help?
General