6-72
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Alert-Level Alarms
SDLLinkOOS
SDL link to remote application out of service.This alarm indicates that the local Unified CM has lost
communication with the remote Unified CM. This alarm usually indicates that a node has gone out of
service (whether intentionally for maintenance or to install a new load for example; or unintentionally
due to a service failure or connectivity failure).
Facility/Sub-Facility
CCM_CALLMANAGER-CALLMANAGER
Cisco Unified Serviceability Alarm Definition Catalog
CallManager/CallManager
Severity
Alert
Parameters
Remote IP address of remote application [String] Unique Link ID. [String] Local node ID [UInt] Local
Application ID. [Enum]RemoteNodeID [UInt] Remote application ID. [Enum]
Enum Definitions for LocalApplicationID and RemoteApplicationID
Recommended Action
In the Cisco Unified Reporting tool, run a CM Cluster Overview report and check to see if all servers
can talk to the Publisher. Also check for any alarms that might have indicated a CallManager failure and
take appropriate action for the indicated failure. If the node was taken out of service intentionally, bring
the node back into service.
History
Cisco Unified Communications
Release Action
8.0(1) Severity changed from Error to Alert.
Code Reason
100 CallManager
200 CTI
To Next Page
Loading...
Need help?
General