7-160
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-SYSLOG-EXT-MIB
DEFVAL { false }
::= { cseSyslogConfigurationGroup 11 }
cseSyslogLinecardMsgSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Minimum severity of the message that are sent from linecards.
DEFVAL { debug }
::= { cseSyslogConfigurationGroup 12 }
Conformance
ciscoSyslogExtMIBConformance OBJECT IDENTIFIER ::= { ciscoSyslogExtMIB 2 }
ciscoSyslogExtMIBCompliances OBJECT IDENTIFIER ::= { ciscoSyslogExtMIBConformance 1 }
ciscoSyslogExtMIBGroups OBJECT IDENTIFIER ::= { ciscoSyslogExtMIBConformance 2 }
ciscoSyslogExtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
The compliance statement for entities which implement the CISCO-SYSLOG-EXT-MIB.
MODULE MANDATORY-GROUPS { ciscoSyslogExtGroup }
OBJECT cseSyslogServerAddressType
SYNTAX Integer { ipv4 (1), dns (16) }
DESCRIPTION
Only dns and ipv4 addresses are need to be supported.
OBJECT cseSyslogServerStatus
SYNTAX Integer { active (1), createAndGo (4), destroy (6)}
DESCRIPTION
Only three values 'createAndGo', 'destroy' and 'active' need to be supported.
OBJECT cseSyslogLinecardEnable
MIN-ACCESS read-only
DESCRIPTION
Write access is not required.
OBJECT cseSyslogLinecardMsgSeverity
MIN-ACCESS read-only
DESCRIPTION
Write access is not required.
OBJECT cseSyslogMessageFacility
To Next Page
Loading...
Need help?
General